Mingyi Silicone(Anhui) Co., Ltd.
Silicone rubber is mainly divided into thermal vulcanization type (that is, high temperature vulcanized silica gel) and room temperature vulcanization type (RTV). The thermal vulcanization type is di......
2021-02-04The insulating material of the silicone wire is mainly high-performance silicone rubber. Its structural feature is that the main chain is alternately composed of silicon atoms and oxygen atoms, and th......
2021-02-04Methyl phenyl vinyl silicone rubber is a product obtained by introducing methyl phenyl silicone chain links or diphenyl silicone chain links into the molecular chain of methyl vinyl silicone rubber. ......
2021-02-04Since the introduction of a small amount of vinyl in the macromolecular structure of silicone rubber can greatly improve the vulcanization processing performance of silicone rubber, most of the curren......
2021-02-03Dimethyl silicone rubber is the earliest type of silicone rubber put into commercial production. It can maintain good elasticity in the range of -60～200℃, good aging resistance, ......
2021-02-03The pendant groups on the main chain of the silicone rubber can be methyl, ethyl, vinyl, phenyl, trifluoropropyl and the like. The most commonly used is methyl, but other groups can also be introduced......
2021-02-03The reinforcing filler of silicone rubber is various types of white carbon black, which can increase the strength of vulcanized rubber ten times. The main purpose of adding various additives is to red......
2021-02-03High temperature vulcanized silicone rubber is a high molecular weight (molecular weight is generally 400-800,000) polyorganosiloxane (ie raw rubber) added with reinforcing fillers and other various a......
2021-02-031. During the molding of silicone products, the silicone rubber is pressed under high pressure, which cannot be eliminated due to the cohesion of the elastomer. When the silicone rubber is molded and ......
2019-12-201. Limited product size 2.Many burrs and waste products occur in the production process 3. The mold cost is relatively high and the development cycle is long.......
2019-12-201.Can be made into any shape 2. High precision, beautiful and regular product shape 3. The color is bright, and you can color it at will......
2019-12-20Molding process is the production process of solid silica gel. It uses two modules above and below, and a mold core is placed in the middle, so it is called molding silicone rubber. The main produc......
2019-12-20High temperature vulcanized silicone rubber is a high molecular weight (generally molecular weight of 400,000 to 800,000) polyorganosiloxane (ie, raw rubber). It is reinforced with fillers and various......
2019-12-20[1] The difference in Mooney viscosity of the elastomer used is too large; [2] Inappropriate selection of plasticizer and rubber; [3] Too much granules; [4] Small partic......
2019-12-19[1] Rubber has expired and is partially gelled; [2] EPDM or butyl rubber is too cold; [3] frozen natural rubber; [4] Insufficient pre-plasticization of natural rubber; &......
2019-12-19
