This product has good processability. The rubber for molding is vulcanized with 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane as vulcanizator, applicable to manufacturing of common silicone rubber products and miscellaneous parts, common silicone rubber keypads, especially pigmented products; and the rubber for extrusion is vulcanized with vulcanizator DCBP (Di-(2,4-dichlorobenzoyl) Peroxide), applicable to manufacturing of low-end miscellaneous extruded silicone rubber products.
Typical Properties:
Category |
Item |
Appearance |
Hardness Shore A |
Tensile strength MPa≥ |
Elongation at break %≥ |
Breaking set %≤ |
Tear strength B KN/m≥ |
Specific density 25°C g/cm³ |
Compression set 180*22h %≤ |
Resilience %≥ |
For molding |
MY D5140 |
Ivory light yellow light gray |
40±2 |
6.0 |
380 |
9 |
16 |
1.13±0.05 |
35 |
60 |
MY D5150 |
50±2 |
7.0 |
320 |
10 |
18 |
1.15±0.05 |
30 |
55 |
||
MY D5160 |
60±2 |
7.0 |
280 |
10 |
18 |
1.18±0.05 |
30 |
50 |
||
MY D5170 |
70±2 |
6.5 |
200 |
9 |
16 |
1.21±0.05 |
30 |
45 |
||
MY D5180 |
80±2 |
6.0 |
150 |
8 |
15 |
1.25±0.05 |
25 |
45 |
||
MY D5190 |
86±2 |
4.0 |
80 |
6 |
10 |
1.25±0.05 |
25 |
40 |
Physical data in the above table is for reference only.
Vulcanization condition: 175℃× 5Min.
Ratio of curing agent 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane:0.65%.
Advantage:
- Good processability
- Stable comprehensive physical properties
Applications:
- Low-end miscellaneous parts molded products
Category |
Item |
Appearance |
Hardness Shore A |
Tensile strength MPa≥ |
Elongation at break %≥ |
Breaking set %≤ |
Tear strength B KN/m≥ |
Specific density 25°C g/cm³ |
Dielectric strength kV/mm ≥ |
Volume resistivity Ω.cm≥ |
For extrusion |
MY D5240 |
Ivory light yellow light gray |
40±2 |
6.0 |
400 |
14 |
16 |
1.13±0.05 |
- |
- |
MY D5250 |
50±2 |
7.0 |
320 |
14 |
18 |
1.15±0.05 |
- |
- |
||
MY D5260 |
60±2 |
7.0 |
280 |
14 |
18 |
1.18±0.05 |
- |
- |
||
MY D5270 |
70±2 |
6.5 |
200 |
12 |
16 |
1.21±0.05 |
- |
- |
||
MY D5280 |
80±2 |
6.0 |
150 |
12 |
15 |
1.25±0.05 |
- |
- |
Physical data in the above table is for reference only.
Vulcanization condition: 175℃× 5Min.
Ratio of curing agent DCBP (Di-(2,4-dichlorobenzoyl) Peroxide):0.65%.
Advantage:
- Flexible processability
- Stable comprehensive physical properties
Application:
- Low-end miscellaneous parts extruded products
Packing & Storage:
- 20kg/ carton lined with plastic bags or sheets.
- The products have a shelf life of 9 months from date of manufacture depending on the shore hardness if stored at room temperature in the originally sealed container.