Usage method:

1, Surface treatment: The surface of the mold or material that needs to be sealed for the first time can be cleaned with white electric oil or detergent water, and then air dried.

2, Mix the AB components evenly in a weight ratio of AB=1:1, and they can be weighed and mixed.

3, Defoaming: Pour the AB glue into stainless steel buckets with filter screens, and send them together with the buckets into a vacuum box for vacuum defoaming. The defoaming process takes about 10-30 minutes, or it can be manually mixed and sent to a defoamer for 2-6 minutes.

4, Curing conditions: Adjust according to the mold and application scenario. Generally, the curing time at room temperature is three times the operating time, that is, one hour of operation is pressing, and three hours can completely demold.

General grade flame retardant rubber, plz check MY DZ540