Home    Company News    Automotive Ceramic Coating Liquid (MY 9970): SiO₂ Network Protection, Application Rules, and Performance Guide

Automotive Ceramic Coating Liquid (MY 9970): SiO₂ Network Protection, Application Rules, and Performance Guide

Hits: 2222 img

Keywords: car ceramic coating liquid, silicone resin paint protection, sol-gel SiO2 coating, hydrophobic car wax alternative, paint gloss protection, MY 9970


Question 1: How does a silicone-based ceramic coating differ from traditional wax or sealant?

Answer: One sentence: instead of sitting on the paint like wax, a sol-gel siloxane/silicate liquid hydrolyzes and condenses into a bonded Si–O–Si/SiO₂ network film — hardness, gloss, and water-repellency that survive washing cycles for months rather than weeks.

The coating cures by moisture-driven hydrolysis and condensation of its alkoxysilane/resin components, crosslinking with itself and partially anchoring to the clear coat. This is the same trisiloxane/silicate chemistry family behind MY's silane and silicone-resin lines. Selection rule: long-term gloss + hydrophobic maintenance → ceramic-type; short-term shine and quick jobs → conventional polymer sealants.

Question 2: What specs decide coating quality, and what application discipline do installers need?

Answer: Let's look scenario by scenario (specific 9970 figures pending TDS confirmation):



Conclusion: A silicone-chemistry ceramic coating sells on durability physics — bonded network versus sacrificial layer — but every claim must rest on measured film data; the industry's inflated hardness labeling makes honest spec sheets a competitive asset rather than a liability. Practical guidance: ① publish only verifiable metrics (contact-angle goniometer readings, Taber or wash-count durability, salt-spray color retention) since detailers increasingly compare numbers; ② specify exact IPA prep-solvent compatibility so installers don't leave uncured sealer under the film; ③ define humidity/temperature windows explicitly on the label because sol-gel cure is water-triggered and mis-controlled application causes the majority of "haze" complaints. Before release, have technical confirm MY 9970's composition class (silane vs. siloxane resin vs. hybrid), solids, and cure schedule, then re-issue this article with verified figures filled into the table above.

Kneading pads addition silicone rubber MY LSR 3M20-306L

Recommend

    Online QQ Service, Click here

    QQ Service

    Wechat Service