Hits: 2232 img
Keywords: vinyl silicone oil, divinyl terminated polydimethylsiloxane, addition cure crosslinker fluid, Si-Vi hydride resin system, LSR base fluid, multi-vinyl silicone fluid
Answer: One sentence: it's linear PDMS capped or side-branched with vinyl groups — the Si–Vi partner that platinum catalysts couple to Si–H fluids to build clean, by-product-free silicone networks.
Every addition-cure LSR, fluorosilicone liquid rubber, and vinyl resin potting system needs defined vinyl chemistry as either base fluid or crosslinker; MY's vinyl-terminated fluids supply exactly this reactive handle with tunable vinyl content. Selection rule: formulating addition systems → controlled-vinyl fluid; simple lubrication/damping → plain dimethicone suffices.
Conclusion: Vinyl silicone fluid is specified by vinyl content, distribution, and end-group architecture — not viscosity alone — because those three numbers define cure speed, network topology, and the mechanical ceiling of everything built from it. It cannot substitute as an inert diluent (reactive sites consume crosslinker unpredictably), and ordinary dimethicone cannot substitute into addition systems (nothing to react). Practical guidance: ① titrate new lots' vinyl value before reformulating — small drift shifts gel time noticeably; ② meter Si–H:Si–Vi by mole, not volume price convenience; ③ segregate drums and pumps from tin/amine-condensation lines. Validate cure rheometer curves on your actual catalyst package before releasing any vinyl-fluid lot change.
Low Viscosity Silicone Oils MY201V3-201V10