For the majority of users, choosing the appropriate silicone rubber adhesive can achieve the desired effect. If the quality of the adhesive is not good enough, there will be endless troubles in the process of use. Carefully choose the adhesive to reduce future troubles.
How to choose silicone rubber adhesive?
Look at the brand. There are all kinds of adhesive brands on the market, try your best to cooperate with powerful and trustworthy brands without worrying about quality problems. Choose high-quality products, cooperate with powerful suppliers, and feel more assured, not only can focus on silicone rubber adhesive research, but also provide customized silicone rubber adhesive application solutions, which are widely used and can be used in new energy, military industry , medical, aviation, shipbuilding, electronics, automobiles, instruments, power supplies, high-speed rail and other industries.

Look at performance. Try it out to see how the adhesive will perform after curing. Such as hardness, gloss, plumpness, adhesion and toughness, etc., the better the performance, the better the quality.

See how it works. For different types of adhesives, the method of use is different. Choose products that are flexible and easy to master as much as possible, saving time and effort.

What are the specific steps for using silicone rubber adhesives?

1. Clean the surface. Clean up the sticky rust and oil stains and other impurities on the surface of the object.

2. Open the cap and apply the silicone rubber adhesive directly to the cleaned surface. When applying, apply as evenly as possible.

3. Put the sealed object in the air and let it cure slowly. The curing process is not short, and it needs to be cured from the outside to the inside. The deeper the bondline, the slower the cure rate. When the temperature is low, extend the curing time appropriately, and do not rush to the next step.