Cooling silicone oil can reduce product deterioration and prolong usage time, but sometimes it can be found that the cooling rate is very slow. How to improve the cooling rate?

1. The operation method of using water quenched oil cooling, which involves draining water at high temperatures and oil at low temperatures, is equivalent to using water to regulate the slow cooling of the oil. However, this requires experience and is more suitable for single piece operations.
2. Choose silicone oil with low viscosity and keep it at an appropriate temperature, which should not be too low. If the viscosity is high, it should not be too high. If the temperature is high, cooling will be slow.
3. By adjusting the concentration, the cooling speed can be adjusted to avoid water cooling too quickly and cracking, and silicon oil cooling too slowly and not hard, which means an intermediate value can be taken.
4. Injecting compressed air after water removal into silicone oil and stirring the oil can accelerate cooling.

Increasing the cooling rate of silicone oil appropriately can save time and enhance its conductivity.

Regarding silicone oil, please check the details:
https://www.siliconerubbers.net/product-iota-hydroxy-silicone-oil.html