Mingyi Silicone(Anhui) Co., Ltd.
I. Requirements for defoamer in coating production: (1) It has a certain affinity with the active substance on the surface of the foam, but it should be insoluble and insoluble in the bubble ......
2024-12-06(1) Drilling: ethyl silicone oil (or methyl silicone oil layer emulsion) is used as a mud additive. (2) Oil recovery: oil and gas separation, defoaming rod. The melting point is 2.8¬13.9℃ ......
2024-12-07(1) Sizing process: water-emulsion silicone defoamer, such as: silicone polyether, the amount added in the sizing tank 0.2-0.25g/L (2) Chemical fiber oil agent: chemical fiber oil agent added......
2024-12-07(1) Sizing process: water-emulsion silicone defoamer, such as: silicone polyether, the amount added in the sizing tank 0.2-0.25g/L (2) Chemical fiber oil agent: chemical fiber oil agent added......
2024-12-06Silicone defoamer is a defoamer that consists of silicone compounds and other additives. They are commonly used to remove air bubbles and foams from liquids, especially in the chemical, petroleum, ......
2024-12-05When adding fumed silica to RTV silicone rubber, attention must be paid to its degree of dispersion in the polymer. After the dispersion process is stopped, the best dispersed fumed silica will for......
2024-12-05Fumed silica aggregate has a three-dimensional branch structure, can form an interactive network in the dispersion system, using this characteristic, fumed silica in the field of sealant, as a thic......
2024-12-04Fumed silica is a very effective reinforcing filler for RTV silicone rubber and can significantly increase its strength. On the one hand, this is due to the small size effect of fumed silica partic......
2024-12-04Room temperature vulcanization (RTV) silicone rubber is divided into two categories in terms of product morphology: single component (RTV-1) and two-component (RTV-2). In terms of vulcanization mec......
2024-12-03The effect of fumed silica on the processing performance of HTV silicone rubber is generally expressed by the degree of structure (∆Crepe), ∆Crepe is equal to the difference between the plastic......
2024-12-03The reinforcement of fumed silica on HTV silicone rubber is affected by its particle size, comparative area and structure, generally the smaller the particle size, the higher the specific surface a......
2024-12-02The use of fumed silicon dioxide can be divided into silicone materials and other areas, of which the amount of organic silicon materials accounted for nearly 60% of the total amount of fumed silicon ......
2024-12-02Methyl MQ silicone resin and vinyl MQ silicone resin are important varieties of silicone resins, which are widely used in various fields due to their unique structure and excellent properties. Meth......
2024-11-29Room temperature vulcanized silicone rubber generally includes two categories: condensation type and addition type. Additive room temperature adhesive is based on linear polydimethylsiloxane with viny......
2024-11-291. High temperature vulcanized silicone rubber (HTV) base material: Ethylene based silicone oil is mixed with crosslinking agents, reinforcing agents, coloring agents, structural control agents, anti......
2024-11-28
