The yellowing and fading of silicone rubber products used in daily life has become a shadow of many of our consumers. They think that silicone rubber materials will appear yellowing and fading, suc......
2022-06-21The production of synthetic rubber is not limited by geographical conditions. From the traditional point of view, it is divided into two categories: general synthetic rubber and special synthetic rubb......
2022-06-16Rubber overvulcanization It refers to the state of the rubber compound at high temperature for a long time. "Dead Glue" Due to the early vulcanization of the mixed rubber with vulcanizing agent......
2022-06-14A. Mixing process Insufficient mixing time, high or low discharge temperature; simultaneous addition of acidic and basic compounding agents (such as stearic acid and scorch retarder ESEN with zinc ox......
2022-06-14What are the benefits of silicone products after oil injection processing? Slippery and sticky, while some silica gel products are just the opposite. They feel good and do not stick to ash. W......
2022-06-14Why do silicone products smell Silica gel is a widely used material in modern times. Silicone Pacifiers for babies, silicone mobile phone cases we hold in our hands, prostheses for profession......
2022-06-14Has the platinum silicone tube reached the food grade standard? With the rapid development and improvement of the industry, various industries continue to innovate, and the silicone tube is a......
2022-06-01Molded silicone rubber foaming products are simply prepared from special silicone rubber raw materials and foaming agent. It is made by one-time molding, which produces a large amount of air ......
2022-06-01Automobile harness is the main body of automobile signal transmission, and plays an important role in automobile design and use. The harness is mainly composed of wires and cables, metal contacts, ......
2022-06-01Advantages of silicone kettles and sharing solutions to odor of silicone kettles Many people have asked me whether the silicone kettle can hold boiling water? I will tell him that the silicon......
2022-06-01Silicone encapsulant has good fluidity, simple and convenient operation, and can be used for molding applications such as infusion and injection. After curing, it has excellent electrical, protective,......
2022-05-30Silicone adhesives are used in electronic products to seal, fix, and fill, but to play their performance role, the colloid must be completely cured as a whole, and it is necessary to ensure that the s......
2022-05-30Question & a knowledge of rubber products production There are four purposes for storing the mixed rubber film after cooling: (1) to restore the fatigue of the rubber and relax the mechan......
2022-05-27Common problems of rubber compound (1) The compounding agent agglomerates due to insufficient plasticization of raw rubber; The roll distance is too large; The roll temperature is too high, t......
2022-05-27When there is a demand for silica gel foam strips, customers should be strict in their choice. The emergence of more and more manufacturers in the market leads to the decline of product level. If y......
2022-05-27