Home    Company News    Polysilazane MY 9108: Ceramic-Converting Binder for Ultra-High-Temperature Coatings and Adhesives

Polysilazane MY 9108: Ceramic-Converting Binder for Ultra-High-Temperature Coatings and Adhesives

Hits: 2224 img

Keywords: polysilazane 9108, SiCN ceramic precursor coating, high temperature ablation resistant binder, silazane adhesive 1000C, Chinese Academy of Sciences grade 108 equivalent, heat resistant silicone coatings


Question 1: What does MY 9108 do that ordinary silicone resins can't?

Answer: One sentence: it's a liquid polysilazane (Si–N backbone) that cures and converts into an amorphous SiCN/SiOC ceramic phase — holding line at temperatures where organic-modified silicone resins char and fail.

Positioned in MY's silazane family as the CAS "108"-equivalent grade (with 9108A mapped to 718 PR132), it sits above the methylphenyl/epoxy-silicone resin tiers on the heat ladder and below only the boron/carbon-bearing silazanes. Selection rule: ≥800 °C protective coatings, abradable seals, or high-heat bonding → silazane like 9108; weathering/hardness below 300 °C → cheaper modified silicones.

Question 2: How does 9108 perform against its sibling grades, and what processing rules apply?

Answer: Let's look scenario by scenario (based on verified catalog data; exact TDS figures pending technical confirmation):



Conclusion: MY 9108 earns selection when your spec says "the coating must still exist after the resin burns away" — rocket-motor insulation linings, abradable tip seals, incandescent hardware corrosion barriers, and high-heat structural bonding are its native territory, while cost-driven sub-300 °C applications should stay on conventional modified silicones. Choosing between 9108, 9150, and the higher-temperature cousins is a matter of matching service temperature margin and cure infrastructure (RT vs. 170 °C), not brand preference. Practical guidance: ① pick the cure route first — RT schedules buy convenience at some conversion depth, thermal schedules buy peak properties; ② enforce moisture-controlled application more strictly than alkoxysilane coatings since uncontrolled reaction causes blushing and porosity; ③ qualify adhesion after actual thermal cycling rather than ambient pulls alone. Request current TDS/COA for MY 9108 and 9108A from our technical team to complete your specification package before pilot trials.

Post cured free liquid silicone rubber series of MY LSR 3620

Recommend

    Online QQ Service, Click here

    QQ Service

    Wechat Service