Hits: 2228 img
Keywords: condensation type mold silicone rubber, RTV-2 replica mold silicone, organotin catalyzed mold rubber, gypsum cement resin casting mold, low shrinkage mold making silicone, MY LSR 3800/3900 series
Answer: One sentence: hydroxyl-terminated PDMS crosslinks via alkoxysilane + organotin catalyst chemistry releasing alcohol — cheap, self-releasing, and ideal for flexible replica molds without presses or platinum chemistry.
MY LSR 3800/3900 series cures at a simple 100:2 weight ratio, forming an elastic mold body resistant to burning, heat, corrosion, and solvents. Selection rule: replicating plaster, resin, PU, cement, or art pieces → condensation grade; food-contact or precision optical tooling → addition grades instead.
Conclusion: Condensation mold rubber wins on cost, simplicity, built-in release, and rough-workshop tolerance — why sculpture and prototyping shops still standardize on it; its chemical limits (alcohol venting, reversion risk) bar it from food-contact molds and ultra-low-shrink precision tooling (<0.1%), which remain addition-grade territory. Practical guidance: ① choose hardness against undercut depth and copy count, not preference; ② let molds breathe open post-demold so residual alcohol escapes before hot-resin casts; ③ batch-log every mix by scale — most "won't cure" complaints trace to volumetric eyeballing of 100:2. Validate detail reproduction and cycle life on your actual master pattern before committing production runs.
Antistatic precipitated silicone rubber MY HTV 336 series