Silicone mold products have stable chemical properties, are food grade, non-toxic, odorless, non corrosive, and have the advantages of high temperature resistance and toughness. They are widely used in daily life, but over time, they may become dirty and affect their appearance. So what should be used to clean silicone mold products?

Step 1: Disassemble the silicone mold product and soak it directly in clean water.

Step 2: If there is a lot of dirt on the silicone mold product, you can use a soft bristle brush and some toothpaste to gently scrub it.

Step 3: Rinse off the foam of the silicone mold products with clean water, and wipe the silicone mold products clean after rinsing.

Step 4: If you want to disinfect silicone mold products with alcohol, do not use too much alcohol, otherwise the silicone rubber products will turn yellow. Then, use a hair dryer to dry the silicone rubber products, and do not let them dry in the sun. There is no need to do so, just hang them in the room. Silicone mold products dry quickly.

The above four steps are simple and effective methods for cleaning silicone molds. I hope they are helpful to everyone.