Mingyi Silicone(Anhui) Co., Ltd.
Silicone rubber can be processed with ordinary rubber processing equipment, but attention should be paid to: ① Keep the processing clean, and do not mix with other rubber, oil or impurities, otherwi......
2022-09-28Silicone sheath: Advantages: non-toxic to human body, good cushioning performance, high wear resistance, oil resistance, water resistance, good flexibility, comprehensive protection, and will not......
2022-09-28Molding rubber, especially liquid silicone (LSR) injection molding, is very challenging. Many consider rubber molding to be less technically difficult. And the fact is quite the opposite. In many case......
2022-09-27The dry powder coloring method is to directly add the powder colorant together with the small material into the rubber, and mix it on an open mill. The advantages of this method are simple operation a......
2022-09-27The biggest quality requirement of silicone buttons is not to break. There will be a certain probability of failure in daily applications. There are many reasons for this. The silicone buttons are mos......
2022-09-261 solid silicone rubber Used as bridging agent, anti-yellowing agent and coupling agent in high temperature mixing silicone rubber (HTV). 2 Liquid silicone rubber As a cross-linking agent for......
2022-09-26In the current market, high-temperature silicone tubes are generally divided into the following categories, namely extruded tubes and special-shaped tube strips. The silicone tube needs to be refined ......
2022-09-23cakes. It is made of food-grade silicone material. Even if it is used at high or low temperature for a long time, it will not cause harm to the human body, and it is not deformed, durable, and not eas......
2022-09-23With the continuous development and upgrading of silicone products, many daily necessities will choose silicone materials, and silicone products have entered our homes, kitchens, and dining tables. Bu......
2022-09-22Electronic structural adhesives refer to adhesives with high strength (compressive strength>65MPa, steel-steel positive tensile bond strength>30MPa, shear strength>18MPa) and strong bearing c......
2022-09-22Polyether-modified silicone oil is modified by grafting polyether segments on the main chain of hydrophobic siloxane. The siloxane part of the polyether-modified silicone oil provides: surface tension......
2022-09-21Silicone mold is made of silicone as raw material. No matter what kind of silicone mold, there will be a little shrinkage, and the degree of index shrinkage is different. The shrinkage has little effe......
2022-09-21There are two kinds of silica gel: one is precipitation silica gel; the other is gas phase silica gel. Fumed silica gel is resistant to high and low temperature impact, the release during vulcanizatio......
2022-09-20Dimethicone oil, also known as polydimethylsiloxane, is a kind of hydrophobic silicone material, colorless or light yellow liquid, odorless, high transparency, heat resistance, cold resistance, small ......
2022-09-20Silicone oil is a kind of polyorganosiloxane with different degree of polymerization chain structure. It is obtained by hydrolyzing dimethyldichlorosilane with water to obtain an initial polycondensat......
2022-09-19
