Hits: 2215 img
Keywords: platinum vulcanized silicone rubber, platinum cured HTV compound, addition cure molding silicone, non-bleeding odorless silicone gum, food grade compression molding silicone, MY HTV 340 series
Answer: One sentence: platinum addition cure builds the network without burning off residues — giving odorless, non-bleeding, transparent molded parts that skip the long volatile-driving post-cure discipline peroxide grades demand.
MY's medical/food-oriented platinum line (HTV 340 series) is explicitly marketed as "odorless & non-bleeding, platinum system," suited to extrusion and compression/injection molding where taste, clarity, and biocompatibility matter. Selection rule: food contact, medical, pale/translucent parts → platinum HTV; heavy industrial profiles on tight budgets → peroxide HTV still wins cost-per-kilogram.
Answer: Let's look scenario by scenario (based on measured parameters of commercially available grades):
Conclusion: Platinum molding compounds are bought for product purity plus cycle speed — transparency, no bleed stain, no peroxide smell — which makes them the default for kitchenware seals, baby articles, medical moldings, and light-colored technical parts. They don't substitute downward into fuel/oil sealing (fluorosilicone territory) or upward into 300 °C aging duty without heat-stabilizer packages regardless of cure chemistry. Practical guidance: ① treat incoming plasticity (Williams) as a process input — re-mill and log rest behavior so cavity fill stays repeatable across shelf-aged lots; ② keep mold cleaners and sprays platinum-safe (no amine-functional releases), or your first hundred shots will out-cure your thousandth; ③ schedule the 200 °C × 4 h post-cure into capacity planning whenever the part meets food, since fast press cure alone doesn't clear extractables. Validate durometer distribution, extraction tests, and compression set on your own tooling before production qualification.
Flame Retardant Silicone Rubber (2mm Flame retardant) MY HTV 323 series